END PLATE

END_PLATE_DRUMS_website

NEVER DUMP YOUR TANKS AGAIN!

E.N.D. PLATE is a NON-CYANIDE product

Never etch another part with END PLATE

E.N.D.-PLATE strips all electroless nickel deposits from the following metals:

  • mild steel
  • high and low carbon steel
  • tool steel (e.g. D2, S7, H13, etc…)
  • stainless steels 300 & 400 series
  • cast iron
  • 17-4 PH
  • Tungston Cobalt Carbide from jet engine parts
  • Chrome Carbide (high velocity oxi-fuel) from jet engine parts 

E.N.D-Plate was developed to replace cyanide strippers and competitive cyanide-free solutions. These products are notoriously slow stripping and short-lived, which makes them cost prohibitive. Companies using sulfuric stripping baths face the problem of etching parts if excessive water is introduced into the stripping bath. E.N.D-Plate has eliminated theses problems.

E.N.D-Plate is also formulated to never have to be dumped. A bath life so extraordinary, the oldest bath dates back to 1982, and is still operational with only minimal additions of E.N.D-Plate to maintain stripping rate. This is cost effective and environmentally better than dumping hazardous materials.

 

jet-airplane-landing-gear2